Product Range
Contact Us

Polycab Non-ISI PP Circular Box Through (2 Way) – Polypropylene Junction Box for 20 and 25 mm Conduit

A round polypropylene (PP) junction box, not ISI marked, with two entries opposite each other and a lid, for 20 and 25 mm conduit. Price on request.

Request price

Polycab Non-ISI PP Circular Box - Through (2 Way) is a round polypropylene (PP) junction box, not ISI marked, with two entries opposite each other and a lid, for 20 and 25 mm conduit. It is used at a light point in the middle of a straight run, and a pull point that breaks a long run so the wires draw in easily. It is the non-ISI polypropylene version of the circular box, with the same entry layout and packs as the ISI box, for jobs where the specification does not call for ISI-marked fittings.

Polycab India Limited is India's largest manufacturer of wires and cables, with 27 manufacturing facilities, 4,300+ authorised distributors, 2,00,000+ retailers and an export presence in 84 countries (polycab.com, October 2026). Polycab is ISO 9001:2015 certified and makes its conduits to IS 9537 (Part 3) and its conduit fittings to IS 3419, from what its catalogue calls "the highest grade of waterproof and fire-resistant polymers". Jai Enterprises supplies Polycab conduit fittings from Bhilai and Raipur all over Chhattisgarh - Bhilai, Raipur, Durg, Korba, Bilaspur, Raigarh, Jagdalpur, Kanker, Ambikapur and every other district - and across India; price on request.

Is this the right one for you?

Check these three things before you order:

  • The run passes straight through the point (a mid-run light point or a pull point).
  • Your conduit is 20 or 25 mm outside diameter - the fitting size is the conduit size.
  • The specification does not call for ISI-marked fittings.

At a glance

  • Price: on request - call +91 9340081159
  • Product: Polycab Non-ISI PP Circular Box - Through (2 Way)
  • Type: a round polypropylene (PP) junction box, not ISI marked, with two entries opposite each other and a lid
  • Sizes: 20 and 25 mm conduit
  • Product codes: CFT3420001, CFT3425001
  • Packs: 20 mm - 40 per pack, 640 per transport pack; 25 mm - 32 per pack, 448 per transport pack
  • Standard: not ISI marked; made of polypropylene (PP)
  • Material: polypropylene (PP)

Sizes, codes and packs

  • 20 mm: code CFT3420001; 40 pcs per standard pack, 640 pcs per transport pack
  • 25 mm: code CFT3425001; 32 pcs per standard pack, 448 pcs per transport pack
  • Pack terms: standard pack = pieces per pack; transport pack = pieces per transport pack (catalogue figures)
  • Source: Polycab B2B all-products catalogue (2025), uPVC conduits and fittings section

Why choose the Polycab Non-ISI PP Circular Box - Through (2 Way)

  • Two entries opposite each other - the right layout for a light point in the middle of a straight run
  • Removable lid - access for wiring, jointing and inspection
  • Polypropylene body, same packs as the ISI box - an alternative where ISI marking is not specified
  • Sized for 20 and 25 mm conduit - the entries take Polycab conduit of the same outside diameter
  • Part of the full Polycab conduit system - pipes to IS 9537 Part 3 and matching boxes, bends, tees, elbows, couplers and saddles

Installation notes

Fix the box first, then cut the conduit to length and push it fully into the entry - the PP box is a push fit (PVC solvent cement does not bond polypropylene).

Set concealed boxes so the lid sits flush with the finished plaster or ceiling - joints must stay accessible, so never plaster over a lid.

Make joints inside the box with proper connectors, keep the earth continuous, and close the lid once the wiring is tested.

Where it is used

  • Light points in the middle of a straight run
  • Pull and inspection points on long runs
  • Corridor and hall lighting runs
  • Concealed and surface conduit wiring in homes, offices and shops

Polycab non-ISI PP circular boxes and lid

Related products

Frequently asked questions

Where is the PP through (2 way) circular box used?

At a light point in the middle of a straight run, and a pull point that breaks a long run so the wires draw in easily. To turn a corner use an angle box; to branch, a tee box; for the end of a run, a terminal box.

Is there an ISI version of this box, and what is the difference?

Yes. This is the non-ISI version: polypropylene (PP), not ISI marked, and a push fit on the conduit (PVC solvent cement does not bond polypropylene). Polycab also makes the ISI PVC through (2 way) box to IS 3419, the Indian standard for fittings for rigid non-metallic conduits, with the same entry layout, sizes (20 and 25 mm) and packs; it can be solvent-cemented to PVC conduit and is the one to use where the specification, the consultant or the authority asks for ISI-marked fittings. If you wish, we will quote both so you can compare before you decide.

Which sizes and codes are available for the PP through (2 way)?

20 mm - CFT3420001; 25 mm - CFT3425001.

How is it packed?

20 mm - 40 per pack, 640 per transport pack; 25 mm - 32 per pack, 448 per transport pack. Tell us the number of pieces or packs you need.

Where can I buy Polycab Non-ISI PP Circular Box - Through (2 Way) in Chhattisgarh?

From Jai Enterprises, Bhilai and Raipur, which supplies Polycab conduits and fittings across Chhattisgarh - Korba, Bilaspur, Raigarh, Jagdalpur, Kanker, Ambikapur and every other district - and across India. Call +91 9340081159 with the size, quantity and delivery location and we will confirm the price, availability and lead time.

How to order

Supplied by Jai Enterprises, Bhilai and Raipur, to every district of Chhattisgarh and across India. To request a price for Polycab Non-ISI PP Circular Box - Through (2 Way), call +91 9340081159 or send an enquiry from this page with the size, the quantity (pieces or packs) and the delivery location, and we will confirm the price, stock and lead time.

Applications

  • Industrial plants
  • Utilities
  • Infrastructure projects
  • Commercial facilities

Availability: Enquiry-based — contact us for stock and lead time.

Share this product

1 of n