Polycab PVC Slip Type Bend (Normal) – 90-Degree Conduit Bend with Sockets, 19, 20 and 25 mm, IS 3419

Polycab PVC Slip Type Bend Normal is a PVC 90-degree sweep bend with a socket at each end that the conduit slips into, in 19, 20 and 25 mm - the normal pattern. It turns a conduit run through a right angle with a smooth sweep, so the wires still draw in easily - the factory-made alternative to bending the conduit.

Polycab India Limited is India's largest manufacturer of wires and cables, with 27 manufacturing facilities, 4,300+ authorised distributors, 2,00,000+ retailers and an export presence in 84 countries (polycab.com, October 2026). Polycab is ISO 9001:2015 certified and makes its conduits to IS 9537 (Part 3) and its conduit fittings to IS 3419, from what its catalogue calls "the highest grade of waterproof and fire-resistant polymers". Jai Enterprises supplies Polycab conduit fittings from Bhilai and Raipur all over Chhattisgarh - Bhilai, Raipur, Durg, Korba, Bilaspur, Raigarh, Jagdalpur, Kanker, Ambikapur and every other district - and across India; price on request.

Is this the right one for you?

Check these three things before you order:

• The run turns through 90 degrees and you want a ready-made bend rather than bending the conduit.
• Your conduit is 19, 20 or 25 mm outside diameter - the fitting size is the conduit size.
• Fittings to IS 3419 are wanted or specified.

At a glance

• Price: on request - call +91 9340081159
• Product: Polycab PVC Slip Type Bend Normal
• Type: a PVC 90-degree sweep bend with a socket at each end that the conduit slips into, in 19, 20 and 25 mm
• Sizes: 19, 20 and 25 mm conduit
• Product codes: on enquiry
• Packs: 19 mm - 48 per pack, 864 per transport pack; 20 mm - 48 per pack, 864 per transport pack; 25 mm - 30 per pack, 600 per transport pack
• Standard: IS 3419
• Material: PVC (Polycab uPVC conduit fittings range)

Sizes, codes and packs

• 19 mm: code on enquiry; 48 pcs per standard pack, 864 pcs per transport pack
• 20 mm: code on enquiry; 48 pcs per standard pack, 864 pcs per transport pack
• 25 mm: code on enquiry; 30 pcs per standard pack, 600 pcs per transport pack
• Pack terms: standard pack = pieces per pack; transport pack = pieces per transport pack (catalogue figures)
• Source: Polycab B2B all-products catalogue (2025), uPVC conduits and fittings section
• Codes on enquiry: the catalogue prints some codes of this item inconsistently, so we confirm the code with your order

Why choose the Polycab PVC Slip Type Bend Normal

• Smooth 90-degree sweep - wires draw through without snagging
• Slip sockets at both ends - the conduit pushes in; solvent cement makes it permanent
• 19, 20 and 25 mm
• Long pattern too - the slip type bend long adds 32, 40 and 50 mm

Installation notes

Cut the conduit square, remove burrs and push it fully into each socket - with PVC solvent cement in concealed work.

Do not put more bends in one run than the wires can be drawn through; add an inspection bend or a box as a pull point on long runs.

Where it is used

• Turning conduit from wall to ceiling or round corners
• Concealed runs in walls and slabs
• Surface runs
• Lighting and socket circuits

Polycab bends, tees and elbows

• Polycab PVC Slip Type Bend Normal (this page) - 19, 20 and 25 mm conduit
• Polycab PVC Slip Type Bend Long - 19, 20, 25, 32, 40 and 50 mm conduit
• Polycab PVC Inspection Bend - 20 and 25 mm conduit
• Polycab PVC Round Tee - 20 and 25 mm conduit
• Polycab PVC Inspection Tee - 20 and 25 mm conduit
• Polycab PVC Round Elbow - 20 and 25 mm conduit
• Polycab PVC Inspection Elbow - 20 and 25 mm conduit

Related products

• Polycab circular boxes (ISI), Polycab deep circular boxes, Polycab fan boxes and lids, Polycab couplers, reducers and saddles, Polycab non-ISI PP circular boxes and lid - the rest of the Polycab conduit fittings
• Polycab MMS FRLS uPVC conduit pipe and HMS FRLS conduit pipe - the pipes these fittings join
• All conduit fittings and all uPVC conduits

Frequently asked questions

What is the difference between the normal and the long slip bend?

Polycab lists the slip type bend in two patterns: normal (19, 20 and 25 mm) and long (19 to 50 mm). Ask us for a sample if the sweep matters on your job.

What is the product code?

The catalogue prints the codes of this bend inconsistently, so we confirm the code with your order: tell us the size and the pattern (normal).

How is it packed?

19 mm - 48 per pack, 864 per transport pack; 20 mm - 48 per pack, 864 per transport pack; 25 mm - 30 per pack, 600 per transport pack. Tell us the number of pieces or packs you need.

Where can I buy Polycab PVC Slip Type Bend Normal in Chhattisgarh?

From Jai Enterprises, Bhilai and Raipur, which supplies Polycab conduits and fittings across Chhattisgarh - Korba, Bilaspur, Raigarh, Jagdalpur, Kanker, Ambikapur and every other district - and across India. Call +91 9340081159 with the size, quantity and delivery location and we will confirm the price, availability and lead time.

How to order

Supplied by Jai Enterprises, Bhilai and Raipur, to every district of Chhattisgarh and across India. To request a price for Polycab PVC Slip Type Bend Normal, call +91 9340081159 or send an enquiry from this page with the size, the quantity (pieces or packs) and the delivery location, and we will confirm the price, stock and lead time.