Product Range
Contact Us

Polycab Fire Alarm Cable – Copper, XLPE, FRLS, Unarmoured or GI Armoured, BS 5467 / BS EN 50288-7

Copper, XLPE insulated, FRLS sheathed fire alarm cable, unarmoured or GI armoured, unscreened (BS 5467) or foil screened (BS EN 50288-7). Price on request.

Request price

The Polycab Fire Alarm Cable is a copper, XLPE insulated, FRLS sheathed cable for fire detection and alarm wiring, unscreened or aluminium-Mylar screened with a drain wire, unarmoured or GI armoured. Polycab's catalogue lists it as generally conforming to BS 5467 and BS EN 50288-7. It is supplied at a price on request: cable prices depend on the construction, the quantity and the raw-material prices on the day.

Polycab India Limited is India's largest manufacturer of wires and cables, with 27 manufacturing facilities, a network of 4,300+ dealers and distributors, 2,00,000+ retailers and an export presence in 84 countries (polycab.com, October 2026). Its cable range runs from house wires and 1.1 kV power and control cables to MV and EHV power cables, with instrumentation, solar, railway, marine, mining, fire-survival and other special cables. Jai Enterprises supplies Polycab cables from Bhilai and Raipur all over Chhattisgarh - Bhilai, Raipur, Durg, Korba, Bilaspur, Raigarh, Jagdalpur, Kanker, Ambikapur and every other district - and across India.

Is this the right one for you?

Check these four things before you order:

  • The circuits are fire detection and alarm wiring - detectors, call points, sounders and panels.
  • Your fire code does not require circuit integrity for these circuits - where it does, use the fire survival cable.
  • You know whether the panel maker asks for a screened cable (common on addressable loops).
  • You know the cores and size (for example 2 core 1.5 sq mm) and whether the run needs armour.

At a glance

  • Price: on request - call +91 9340081159
  • Product: Polycab Fire Alarm Cable
  • Type: FRLS fire alarm cable
  • Conductor: annealed copper
  • Insulation: XLPE
  • Screen: unscreened (BS 5467 type), or aluminium-Mylar screened with ATC drain wire (BS EN 50288-7 type)
  • Armour: unarmoured or GI armoured
  • Sheath: FRLS inner and outer sheath
  • Standards: BS 5467 (unscreened type); BS EN 50288-7 (screened type)
  • Source: Polycab B2B all-products catalogue (2025), p 22

Construction and standards

  • Conductor: annealed copper
  • Insulation: XLPE
  • Screen: none, or aluminium-Mylar tape with an annealed tinned copper (ATC) drain wire
  • Inner sheath: FRLS
  • Armour: unarmoured or GI armoured
  • Outer sheath: FRLS
  • BS 5467: armoured thermosetting-insulated cables, 600/1000 V and 1900/3300 V
  • BS EN 50288-7: instrumentation and control cables for analogue and digital signals, with maximum rated voltages of 90, 300 or 500 V AC; not for connection to mains power
  • Note - Armour: BS 5467 is a standard for armoured cables; the unarmoured version follows its other construction details (the catalogue says "generally conforming") - if your specification names BS 5467, order the GI armoured version
  • Source: Polycab B2B all-products catalogue (2025), p 22

Why choose the Polycab Fire Alarm Cable

  • FRLS inner and outer sheath - limits flame spread and smoke
  • XLPE insulated copper conductors
  • Unscreened or foil-screened with drain wire, for conventional or addressable systems
  • Unarmoured for conduit and trunking, GI armoured for exposed runs

How to choose and specify it

Screened or unscreened. Many addressable panel makers ask for a screened loop cable to keep noise off the data on the loop; conventional zones are often wired with unscreened cable. Follow the panel maker's cable specification, carry the drain wire through every device and earth it where the panel maker says - usually at the panel only.

Circuit integrity. This is an FRLS cable: it limits flame spread and smoke, but it is not a fire survival cable. Where the fire code or consultant needs the alarm circuits to keep working in a fire, use the Polycab Fire Survival Cable.

Armour. Use unarmoured cable in conduit or trunking and GI armoured cable on exposed or outdoor runs.

Where it is used

  • Fire detection and alarm systems in offices, hotels, hospitals and apartments
  • Detector loops, manual call points and sounders
  • Fire panels and repeater panels
  • Industrial plants and warehouses
  • Public address and emergency signal wiring where an FRLS cable is specified

Other Polycab fire protection and heat-resistant cables

Related products

Frequently asked questions

What is the price of the Polycab Fire Alarm Cable?

The Polycab Fire Alarm Cable is supplied at a price on request, because cable prices depend on the construction, the quantity and the raw-material prices on the day. Call +91 9340081159 for a quotation.

Is this a fire survival cable?

No. It is an FRLS fire alarm cable: the sheath limits flame spread and smoke. Circuits that must keep working during a fire need the fire survival cable, which has mica glass tape and is tested for circuit integrity.

Do I need the screened version?

Many addressable panel makers ask for a screened loop cable; conventional zones are often wired unscreened. Follow your panel maker's specification.

Is an armoured version available?

Yes - both versions are made unarmoured or GI armoured.

Where can I buy the Polycab Fire Alarm Cable in Chhattisgarh?

From Jai Enterprises, Bhilai and Raipur, which supplies Polycab cables to every district of Chhattisgarh and across India. Call +91 9340081159 for the price, stock and lead time.

How to order

Price on request: call +91 9340081159 or send an enquiry from this page with screened or unscreened, the cores and size, armoured or not, the length and the delivery location, and we will confirm the price, availability and lead time. Ask for the Polycab datasheet for your exact construction before you order.

Applications

  • Industrial plants
  • Utilities
  • Infrastructure projects
  • Commercial facilities

Availability: Enquiry-based — contact us for stock and lead time.

Share this product

1 of n