Polycab Jelly-Flooded Coaxial Cable – RG 6 F, RG 11 F and RG 59 F, 75 ohm, for DTH and CATV

Gas-injected physical polyethylene foam insulation with laminated aluminium tape and aluminium wire braid, jelly flooded, PVC black jacketed industrial coaxial cable. RG 59 F, RG 6 F and RG 11 F are the three standard sizes for DTH dish feeds, cable TV distribution and antenna runs: a 75 ohm low-loss cable with gas-injected foam insulation, aluminium foil and braid shielding and water-blocking jelly for outdoor runs.

Polycab India Limited is India's largest manufacturer of wires and cables, with 27 manufacturing facilities, 4,300+ authorised distributors, 2,00,000+ retailers and an export presence in 84 countries (polycab.com, October 2026). Jai Enterprises supplies the Polycab cable range from Bhilai and Raipur all over Chhattisgarh - Bhilai, Raipur, Durg, Korba, Bilaspur, Raigarh, Jagdalpur, Kanker, Ambikapur and every other district - and across India; price on request.

Is this the right one for you?

Check these three things before you order:

• The signal is 75 ohm: DTH dish, cable TV, antenna or video distribution.
• You know the size: RG 59 for short runs, RG 6 for most dish and TV runs, RG 11 for long trunk runs.
• Part of the run is outdoors - the jelly-flooded, weather-resistant construction suits it.

At a glance

• Price: Request price
• Product: Polycab Industrial Jelly-Flooded Coaxial Cable
• Type: RG 6 / RG 11 / RG 59 coaxial cable
• Range: RG 59 F, RG 6 F and RG 11 F with copper or CCS conductor, nitrogen gas-injected polyethylene foam insulation, bonded aluminium foil, aluminium-alloy braid, water-resistant jelly flooding, weather-resistant PVC sheath; 75 ohm low-loss coaxial cable for DTH and CATV
• Standard: Polycab standard

Specifications

• Construction: Gas-injected physical polyethylene foam insulation with laminated aluminium tape and aluminium wire braid, jelly flooded, PVC black jacketed industrial coaxial cable
• Range: RG 59 F, RG 6 F and RG 11 F with copper or CCS conductor, nitrogen gas-injected polyethylene foam insulation, bonded aluminium foil, aluminium-alloy braid, water-resistant jelly flooding, weather-resistant PVC sheath; 75 ohm low-loss coaxial cable for DTH and CATV
• Standard: Polycab standard
• Features: minimum loss due to low attenuation in signal strength, for better reception, higher bandwidth: larger network coverage, less electromagnetic interference due to high shielding efficiency, minimal structural return loss, moisture proof, physical foam insulation

Why choose Polycab Industrial Jelly-Flooded Coaxial Cable

• Low attenuation gas-injected foam PE insulation - minimum loss in signal strength
• High shielding efficiency from bonded aluminium foil plus aluminium-alloy braid - less EMI
• Higher bandwidth for larger network coverage
• Minimal structural return loss
• Moisture proof - water-resistant jelly flooding and weather-resistant PVC sheath

Installation notes

Use RG 6 for the dish-to-receiver run in most homes; RG 11 for long trunk runs or distribution to many points.

Use the matching F-connectors and avoid tight bends and kinks, which raise return loss.

Seal outdoor connectors against water.

Where it is used

• DTH satellite dish feeds
• Cable TV (CATV) distribution
• Antenna and MATV systems in apartments and hotels
• Video distribution

Other Polycab communication and special cables

• Polycab 3-Core Flat Submersible Cable - 3C flat submersible cable
• Polycab Industrial Telephone (Switchboard) Cable - telephone / switchboard cable
• Polycab Industrial Jelly-Flooded Coaxial Cable - RG 6 / RG 11 / RG 59 coaxial cable (this page)
• Polycab CCTV Cable (3+1 and 4+1) - CCTV cable
• Polycab LAN (Networking) Cable - Cat 6 / Cat 6a / Cat 5e - LAN cable
• Polycab Industrial Speaker Wire (OFC) - speaker wire

Related products

• All Polycab cables
• Communication and data cables
• Polycab Green Wire+ house wire - the matching house wire for the building
• Polycab Suprema E-beam house wire

Frequently asked questions

Which size should I use - RG 59, RG 6 or RG 11?

RG 59 F for short indoor runs, RG 6 F for most DTH dish and cable-TV runs, RG 11 F for long trunk and distribution runs where loss must be lowest.

What is the impedance?

75 ohm, the standard for television, DTH and CATV systems.

What is it made of?

Copper or copper-clad steel (CCS) conductor, nitrogen-gas-injected polyethylene foam insulation, bonded aluminium foil, aluminium-alloy braid, water-resistant jelly flooding and a weather-resistant black PVC sheath.

Why jelly flooded?

The jelly blocks water from travelling along the cable if the sheath is nicked outdoors, which protects the signal over the years.

Where can I buy Polycab Industrial Jelly-Flooded Coaxial Cable in Chhattisgarh?

From Jai Enterprises, Bhilai and Raipur, which supplies Polycab wires and cables across Chhattisgarh - Korba, Bilaspur, Raigarh, Jagdalpur, Kanker, Ambikapur and every other district - and across India. Call +91 9340081159 with the size, quantity and delivery location and we will confirm the price, availability and lead time.

How to order

Supplied by Jai Enterprises, Bhilai and Raipur, to every district of Chhattisgarh and across India. To request a price for Polycab Industrial Jelly-Flooded Coaxial Cable, call +91 9340081159 or send an enquiry from this page with the size or type, length and delivery location, and we will confirm availability, lead time and the delivered cost.